Search results for "Masonry column"

Modelling of FRP and FRCM-Confined Masonry Columns: Critical Review for Design and Intervention Strategies

2022

This paper presents a critical review of the most established analytical models for the prediction of the compressive strength of FRP and FRCM-confined masonry columns. In particular, two types of fibres are analysed, i.e. glass and basalt. A wide dataset available in the literature is used for the application of the analytical models and for the development of parametric analyses useful for the critical comparison of FRP vs. FRCM confinement technique and glass vs. basalt fibres to be adopted as reinforcement of masonry substrate. The effects of stiffness and strength of the reinforcement, the number of reinforcing layers, the compressive strength of masonry and the cross-section shape are…

Experimental Investigation on the Compressive Behaviour of Clay Brick Masonry Columns Confined by BFRP or Steel Wires

2016

This paper presents the results of an experimental research aiming to investigate on the compressive behavior of full size clay brick masonry columns reinforced with Basalt Fiber Reinforced Cementitious Matrix (BFRCM) or with steel wires collaring. Uniaxial compressive tests were performed on eight retrofitted columns and four control specimens. Two masonry strength were considered by varying the mortar grade. Results are presented and discussed in terms of axial stress-strain relationships, failure modes and crack patterns of the specimens tested up to failure. For the limit of investigated variables, comparisons with unreinforced specimens show the ability of these alternative techniques …

Experimental investigation on the effectiveness of basalt-fibre strengthening systems for confining masonry elements

L’impiego di materiali compositi per il rinforzo di colonne in muratura è diventato una pratica ampiamente diffusa nel corso degli ultimi decenni. Questa tecnica, che consiste generalmente nell’applicazione di materiali polimerici fibrorinforzati (Fibre Reinforced Polymer-FRP), ha mostrato buone potenzialità, essendo in grado di garantire notevoli incrementi di resistenza e duttilità dell’elemento rinforzato, grazie ad un’azione di confinamento passivo. Tuttavia, l’impiego di compositi a matrice polimerica presenta alcuni limiti legati soprattutto alle prestazioni delle resine epossidiche, che a causa della loro natura sintetica danno luogo a problemi di compatibilità con il supporto murari…

Stability analysis of clay brick masonry columns: numerical aspects and modelling strategies

2014

Stability analysis of masonry piers and columns is one of the most frequently treated subjects in the field of structural engineering. This attention is probably due to the challenge to solving the problem including different effects, which play an important role in evaluating the response of eccentrically-loaded columns. In this connection, accurate stability analysis of masonry piers and columns has to take into account the non-linear stress–strain law of masonry in compression, the limited tensile strength, the induced slenderness due to crack formation and geometrical non-linearity. Different theoretical models and numerical approaches were developed in the past to analyze the combined …

Comparative experimental analysis on the compressive behaviour of masonry columns strengthened by FRP, BFRCM or steel wires

2017

Abstract In the last decade, several studies have investigated the application of Fibre Reinforced Polymer (FRP) wraps to masonry piers in order to provide a confinement effect and enhance compressive strength and ductility. Although this technique has proved to be quite effective, various drawbacks arise when organic resins are used to bind fibres. To solve these problems, different techniques have been developed to be used as alternative methods for enhancing the structural performances of weak masonry columns. Among these, the use of Basalt Fibre Reinforced Cementitious Matrix (BFRCM) wrapping, or the application of steel wires at mortar joints. This paper presents the results of an expe…

Numerical Modeling Approaches of FRCMs/SRG Confined Masonry Columns

2019

The Fabric Reinforced Cementitious Matrices (FRCMs) and Steel Reinforced Grout (SRG) are a promising strengthening solution for existing masonry since inorganic matrix is considerably compatible with historical substrates. The present paper is focused on a Finite Element (FE) analysis of masonry columns confined with FRCM composites developed by Abaqus-code. The masonry columns were modelled using a macro model approach. The model was performed by using the following functions Concrete Damage Plasticity (CDP) and the Plastic (P) in order to describe the constitutive laws of material for masonry columns and external reinforcement, respectively. Typical failures of FRCM-systems are slippage o…

EXPERIMENTAL ANALYSIS OF SMALL CLAY BRICK CYLINDERS CONFINED BY BFRP GRID UNDER AXIAL COMPRESSION

2019

Many investigations have shown that fibre reinforced polymer (FRP) composites can be effectively used to induce a passive confinement action on masonry columns and improve their axial capacity and ductility. This paper presents the results of an experimental study on the compressive behaviour of clay brick masonry cylinders externally wrapped with basalt fiber reinforced polymer (BFRP) grids. The circular section shape was chosen to assess the pure confinement effect on the masonry material. Fourteen clay brick masonry cylinders, cored from two different masonry assembly types, were confined with one or two layers of BFRP grids. The two assemblies were used to investigate the effect of vert…

Performance Assessment of Basalt FRCM for the Confinement of Clay Brick Masonry Cylinders

2021

Fibre Reinforced Cementitious Matrix (FRCM) composites have been proved to be a suitable strengthening material for masonry structures in the last years. Moreover, basalt fibres are increasingly used as reinforcement of composites as a more sustainable alternative to glass fibres. The goal of this work is to investigate the effectiveness of basalt FRCM to confine masonry circular columns. A total of eighteen clay brick masonry cylinders were tested in compression. The specimens were cored from two different masonry assemblies and wrapped with one or two layers of BFRCM composite. The stress-strain curves and the gains of strength and strain capacity of confined cylinders compared to the con…

BFRP grid confined clay brick masonry cylinders under axial compression: Experimental results

2018

The use of composite materials for retrofitting of masonry structures has received great attention during the last two decades. For masonry buildings there are several advantages in using composite materials. Traditional techniques that were largely used and investigated in the past, may be inadequate in seismic areas where the added mass could increase seismic actions. Moreover, for historical and architectural heritage structures, the compatibility, sustainability and reversibility of the intervention is a key factor for the selection of the most appropriate strengthening system. Many investigations have shown that fibre reinforced polymers (FRP) can be effectively used to induce a passiv…